Back part

	On/off button
	Volume adjustment buttons
	Power supply
	Camera
	Sound output
	Slot for SIM card
	Micro SD card slot
	USB port with power support
	Speakers

top

Inserting and activating the data SIM card

1.Switch off the touch cash register. Remove the rubber cover from the upper side and plug the data SIM card into the left slot at the cash register top side (when looking at the back side) as shown in the picture. Insert the SIM card with the skewed side out until it clicks audibly.

2.Cover the connectors with the cover and switch the cash register on. If the SIM card is secured, a dialog for entering the PIN will appear.

top

Cash register connection

1.Connect the cash register to the socket using the power adapter, and leave it to be charged continuously. The charging status can be constantly checked by short pressing the switch-on button. You can use also the USB port to charge the cash register.

2.Once the cash register is fully charged, plug the printer cable into the cash register USB port and then switch on both the cash register and printer.

3.If you have a mobile Bluetooth printer, insert the battery into the lower part and click it in. Connect the power adapter to the Bluetooth printer and then plug it into the socket. Let the printer charge. Once the printer is fully charged, the light goes out. Now you can start using it.

To use a Bluetooth printer, it first has to be paired with the cash register. The pairing sequence is described in this chapter.

Every time when you discharge the cash register completely, leave it to be switched off and charged continuously for at least 4 hours, so the condition of the built-in battery will be optimized.

top