In this setting you enable the communication of the cash register with the certified scale controller. This is required for authenticated connection between the scale and the cash register. Connecting the scale and setting up the authenticated connection is described in this chapter.
If the certified scale driver is not installed in the cash register, you will be asked to install it through the Dotypos Marketplace.
|
To prevent inaccurate weighing, we recommend activating the Require stable weight option in the Application settings. |
|
•Certified scale connection is a paid service and the scale and cash register connection must be sealed by a technician. After the above steps, it is therefore necessary to contact the manufacturer of the scale (which in the case of Dotypos s.r.o. scales is LESAK s.r.o.) at 775 873 570 (primary in the Czech language) and arrange a visit of a technician who will perform the sealing. You will also be able to obtain information on the fee for this service by calling the above-mentioned telephone number. Dotypos company does not verify the connection of the scale or intervene with the customer. •The whole certification procedure from LESAK s.r.o. is presented in this document (in the Czech language). •If you do not have a scale from Dotypos, please contact your scale supplier or dealer directly for a certified connection. •The maximum unit or total price (quantity x unit price) of the weighted item is CZK / EUR 9,999.99. Sales above this amount are not possible in certified (Welmec) mode. |
